Triumph 650 Bolt on Hardtail T-120, TR6, T-150 1963-1970 TR1665
This hardtail will fit all Triumph unit 650 twins, all T-150 Trident triples, and 1960-1962 Duplex framed pre
unit 650's. All of our bolt on hardtails use our unique machined upper and lower mounts. This is by far, the
highest quality Triumph hardtail on the market. Other companies started copying our design shortly after
we came out with them but no one has successfully copied the quality and fit of our hardtails. We have the
lower dog leg bends and our stress relieving process dialed in perfect so this is truly a bolt on hardtail with
tubes that run straight all the way back. These are 100% tig welded in a jig by a professional welder.
Available in any stretch and axle height. Please specify desired stretch, desired ride height, and your rear
tire size. Desired ride height is the distance from the ground to the bottom of the frame rail. These are
made to order and will take approximately 4-6 weeks.
Specs:
1" diameter x .120" wall seat tubes and lower tubes
Billet machined upper and lower mounts (includes upper bolt)
3/8" thick axle plates with a 3/4" slot
7 7/8" width between axle plates
Includes welded on brake tab
Please contact us for pricing and availability
This hardtail will fit all Triumph unit 650 twins, all T-150 Trident triples, and 1960-1962 Duplex framed pre
unit 650's. All of our bolt on hardtails use our unique machined upper and lower mounts. This is by far, the
highest quality Triumph hardtail on the market. Other companies started copying our design shortly after
we came out with them but no one has successfully copied the quality and fit of our hardtails. We have the
lower dog leg bends and our stress relieving process dialed in perfect so this is truly a bolt on hardtail with
tubes that run straight all the way back. These are 100% tig welded in a jig by a professional welder.
Available in any stretch and axle height. Please specify desired stretch, desired ride height, and your rear
tire size. Desired ride height is the distance from the ground to the bottom of the frame rail. These are
made to order and will take approximately 4-6 weeks.
Specs:
1" diameter x .120" wall seat tubes and lower tubes
Billet machined upper and lower mounts (includes upper bolt)
3/8" thick axle plates with a 3/4" slot
7 7/8" width between axle plates
Includes welded on brake tab
Please contact us for pricing and availability
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Copyright Elswick Cycles 2008-2012